PEPTIDESMADE SIMPLE
Mixing chart and video

How to reconstitute Sermorelin

Sermorelin usually comes as a freeze-dried powder in a 5 mg or 10 mg vial (clinics also use 2, 9 and 15 mg). Both charts here use 3 mL of bacteriostatic water, the way the Reconstitution Encyclopedia mixes them: on the 5 mg vial every 6 units holds 100 mcg, and on the 10 mg vial every 6 units holds 200 mcg. The calculator takes any other vial or amount of water.

  • 5 mg vial: add 3 mL of bacteriostatic water. That makes 1.67 mg/mL, so each unit on a U-100 insulin syringe holds 16.7 mcg, and 200 mcg is 12 units.
  • 10 mg vial: add 3 mL of bacteriostatic water. That makes 3.33 mg/mL, so each unit on a U-100 insulin syringe holds 33.3 mcg, and 200 mcg is 6 units.

Get this chart as a printable PDF

The amounts are examples for the arithmetic, not recommendations. For research and education only.

Reconstitution Insights · 3:29Jump to 5 mg vial 1:3910 mg vial 2:24

Sermorelin units chart

What each amount comes to on a 1 mL (U-100) insulin syringe, with the water used in the video. Using a different amount of water? The calculator works it out.

5 mg vial + 3 mL bacteriostatic water

1.67 mg/mL concentration16.7 mcg in each unit

AmountUnits (U-100)Volume
50 mcg3 units0.03 mL
100 mcg6 units0.06 mL
150 mcg9 units0.09 mL
200 mcg12 units0.12 mL
250 mcg15 units0.15 mL
300 mcg18 units0.18 mL
350 mcg21 units0.21 mL
400 mcg24 units0.24 mL
450 mcg27 units0.27 mL
500 mcg30 units0.3 mL

Open this vial in the calculator

10 mg vial + 3 mL bacteriostatic water

3.33 mg/mL concentration33.3 mcg in each unit

AmountUnits (U-100)Volume
100 mcg3 units0.03 mL
200 mcg6 units0.06 mL
300 mcg9 units0.09 mL
400 mcg12 units0.12 mL
500 mcg15 units0.15 mL
600 mcg18 units0.18 mL
700 mcg21 units0.21 mL
800 mcg24 units0.24 mL
900 mcg27 units0.27 mL
1 mg30 units0.3 mL

Open this vial in the calculator

Peptides Made Simple: Reconstitution Encyclopedia cover

This chart is 1 of 168 in the Reconstitution Encyclopedia: 67 peptides and blends at every common vial size. All three books as ebooks, straight from Matthew.

Step by step

The same steps as the video, in writing.

  1. Check the label.

    The vial says how much powder is in it: 5 mg or 10 mg.

  2. Draw the water.

    Use bacteriostatic water: 3 mL for the 5 mg vial; 3 mL for the 10 mg vial. If it's more than 1 mL, a 3 mL syringe does it in one draw.

  3. Add it slowly.

    Let the water run down the inside wall of the vial, then swirl gently until the powder has dissolved. Don't shake it.

  4. Write the strength on the vial.

    For the 5 mg vial that's 1.67 mg/mL, or 16.7 mcg per unit, plus the date you mixed it.

  5. Find your amount.

    Read the units from the chart, or put your own numbers in the calculator. Then check it backwards: units × mcg per unit should give the amount you wanted.

On Peptide Insights

The Sermorelin overview

For what Sermorelin is and what research has looked at, here is Matthew's full video on Peptide Insights, his main channel. 8:02 long.

Read the Sermorelin profileSermorelin dosageWatch on YouTube ↗

Free printable PDF

Get the Sermorelin chart as a printable page.

Every vial size on one sheet, to keep next to the vials. Free, by email.

Free. We'll send material on the peptides you've viewed here. Unsubscribe anytime. Privacy policy.

Questions about mixing this one? Ask in Peptide Academy, free to join.

Reconstitution Encyclopedia

This chart is one of 168 in the Reconstitution Encyclopedia: 67 peptides and blends, every common vial size, mixed step by step.

Questions

How much bacteriostatic water do you add to a 5 mg Sermorelin vial?

In the Reconstitution Insights video, Matthew adds 3 mL. That makes 1.67 mg/mL, so each unit on a U-100 insulin syringe holds 16.7 mcg. You can use more or less water: the amount of peptide in the vial stays the same, only what each unit holds changes. The calculator works it out for any amount.

How much bacteriostatic water do you add to a 10 mg Sermorelin vial?

In the Reconstitution Insights video, Matthew adds 3 mL. That makes 3.33 mg/mL, so each unit on a U-100 insulin syringe holds 33.3 mcg. You can use more or less water: the amount of peptide in the vial stays the same, only what each unit holds changes. The calculator works it out for any amount.

How many units do I draw for an amount of Sermorelin?

Divide the amount you want (in mcg) by what one unit holds. For example, 200 mcg from the 5 mg vial mixed with 3 mL is 12 units (0.12 mL); 200 mcg from the 10 mg vial mixed with 3 mL is 6 units (0.06 mL). The chart above lists the other amounts.

What is a unit on an insulin syringe?

U-100 insulin syringes are marked in units: 100 units is 1 mL, so 1 unit is 0.01 mL whatever the size of the syringe. A 0.3 mL syringe holds 30 units and a 0.5 mL syringe holds 50.

Is this dosing advice?

No. The amounts are examples for the arithmetic, not recommendations. This page is for research and education only and isn't medical advice.

Free printable chartEvery common vial size, plus a lab log
Get it free
All 3 ebooks, $27168 mixing charts in the Encyclopedia
See them